Cisco – Define default GW based on source

Was recently working on a project for a client where the client needed to route traffic from a specific network over a T1 and send the rest of the traffic out the default gateway of the router.  In order to accomplish the task I configured policy based routing on the 2911 as follows:

interface GigabitEthernet0/0.4

encapsulation dot1q 4

ip address 10.2.1.1 255.255.255.0

ip policy route-map NoDSL

access-list 101 permit 10.2.1.0 0.0.0.255 any Read More